Barrick logo

SUPPLY OF A SERVICE TRUCKS

WhatsApp
Twitter
Email
LinkedIn
Instagram

REQUEST FOR QUOTATION FOR SERVIC TRUCKS

SUPPLY OF A SERVICE TRUCKS

North Mara Gold Mine, a fully owned subsidiary of Twiga Minerals Corporation, which is ultimately owned by Barrick Gold Corporation and the Government of the United Republic of Tanzania requests the submission of Tenders from reputable, experienced, certified and qualified parties to provide the following:

Supply of a Service Trucks(i) an Articulated Bell 40 Ton Dump Truck, (ii) Lube Truck – 40t ADT based: Field Service Truck Module (iii) Lube Truck – 40t ADT Based: Rig Diesel-Lube Truck

Tender ref: NM39/2022

Technical Requirements

(i) Articulated Bell 40 Ton Dump Trucks

  • +40 Ton Articulated Bell Dump Truck x 2
  • 6 Wheel Drive, All Terrain
  •  3x Axels
  •  Rebuilt Units
  •  Weight 29.9 t
  •  Standard tires 29.5 R25
  •  Dump capacity 24 m°
  •  Travel speed 54 km/h
  •  Net load37 t
  • Transport length10.5 m
  •  Transport width3.357 m
  •  Transport height3.855 m
  •  Turning radius outside9.203 m
  •  Loading height3.06 m
  •  Engine Manufacturer Mercedes-Benz
  •  Engine type OM501LA
  •  Hydraulic system to OEM specifications

(ii) Lube Truck – 40t ADT Based: Rig Diesel-Lube Truck

  • 2000L Coolant
  •  2000L Waste Coolant
  •  2000L Engine Oil
  •  2000L Hydraulic Oil
  • 880Kg of Grease
  •  2000L Compressor Oil
  •  2000L Gear Oil
  • 5000L Diesel Fuel
  •  9OOOL Water Tank
  •  Bunded Tank
  •  Tool Compartment

Front Configuration

1. Coolant: 2000L

  • Dispensing
  •  Dispensing Nozzle: Piusi Pistol-ONE Dispensing Nozzle
  •  Nozzle Coupler: Dispensing valve stock included nozzle
  •  Hose Storage: Spring Retracting Hose Reel
  •  Transfer Type: Pneumatic 25 Lpm
  •  Filtration: Donaldson 200-micron SS wire mesh filter
  •  Metering: Flow Meter
  •  Receiving
  •  Receiver: Wiggins Dry Break Receiver
  •  Product Tank
  •  Parker pancake breather – 3 microns.
  •  Sand blasted SA2.5
  •  Internal treatment – Chemically stabilized.
  • External etch primed and OEM topcoat.

2. Waste Coolant: 2 000 L

  • Suction/Discharge
  •  Transfer Type: Pneumatic 25 Lpm
  •  Discharge Hose Storage: Spring Retracting Hose Reel
  •  Product Tank
  •  Camlock Receiver
  •  Parker pancake breather – 3 microns.
  •  Sand blasted SA2.5
  •  Internal treatment – Chemically stabilized.
  •  External etch primed and OEM topcoat.

Deck Configuration

1. Engine Oil: 2000 L (1000 L x 2)

  • Dispensing
  • Dispensing Nozzle: Piusi Pistol-ONE standard anti-drip
  •  Hose Storage: Spring Retracting Hose Reel
  •  Transfer Type: Pneumatic 25 Lpm
  •  Filtration: Donaldson 25micron
  •  Metering: Flow meter
  •  Receiving
  •  Receiver: Wiggins Dry Break Receiver
  • Product Tank
  •  Parker pancake breather – 3 microns.
  •  Sand blasted SA2.5
  •  Internal treatment – Chemically stabilized.
  •  External etch primed and OEM topcoat.

2. Hydraulic Oil: 2000 L (1000 L x 2)

  • Dispensing
  •  Dispensing Nozzle: Piusi Pistol-ONE standard anti-drip
  •  Hose Storage: Spring Retracting Hose Reel
  •  Transfer Type: Pneumatic 25 Lpm
  •  Filtration: Donaldson 25micron
  •  Metering: Flow meter
  •  Receiving
  •  Receiver: Wiggins Dry Break Receiver
  •  Product Tank
  •  Parker pancake breather – 3 microns.
  •  Sand blasted SA2.5
  • internal treatment – Chemically stabilized.
  •  External etch primed and OEM topcoat.

3. Grease: 880 kg

  • Dispensing
  •  Dispensing Nozzle: Fast Fill Grease Matrix Nozzle
  •  Hose Storage: Spring Retracting Hose Reel
  •  Receiving
  •  Receiver: Fast Fill Grease Matrix Nozzle
  • Product Tank
  •  Parker pancake breather – 3 microns.
  •  Sand blasted SA2.5
  • lnternal treatment – Chemically stabilized.
  •  External etch primed and OEM topcoat.

3. Grease: 880 kg

  • Dispensing
  •  Dispensing Nozzle: Fast Fill Grease Matrix Nozzle
  •  Hose Storage: Spring Retracting Hose Reel
  •  Receiving
  •  Receiver: Fast Fill Grease Matrix Nozzle
  • Product Tank
  •  Parker pancake breather – 3 microns.
  •  Sand blasted SA2.5
  • lnternal treatment – Chemically stabilized.
  •  External etch primed and OEM topcoat

4. Compressor Oil:

Allow for 2x 210L deck mounted drum clamps OR Optional Extra: Self-filling pump & dual

filtration system with standards ETT truck tank instead of drums.

  • Dispensing
  •  Dispensing Nozzle: Piusi Pistol-ONE standard anti-drip
  •  Hose Storage: Spring Retracting Hose Reel
  •  Transfer Type: Pneumatic 25 Lpm
  •  Filtration: Donaldson 25micron
  •  Metering: Flow meter
  •  Receiver: Wiggins Dry Break Receiver
  • Product Tank
  •  Parker pancake breather – 3 microns.
  •  Sand blasted SA2.5
  • lnternal treatment – Chemically stabilized.
  •  External etch primed and OEM topcoat.
  •  Gear Oil: 2000 L(1000L x 2)

Dispensing

  •  Dispensing Nozzle: Piusi Pistol-ONE standard anti-drip
  •  Hose Storage: Spring Retracting Hose Reel
  •  Transfer Type: Pneumatic 25 Lpm
  •  Filtration: Donaldson 25micron
  •  Metering: Flow meter

 Receiving

  •  Receiver: Wiggins Dry Break Receiver

 Product Tank

  •  Parker pancake breather – 3 microns.
  •  Sand blasted SA2.5
  • lnternal treatment – Chemically stabilized.
  •  External etch primed and OEM topcoat.

Base Configuration

  1. Diesel: 5000L
  2. Pumping System
  3.  Pumping System: 250 Lpm (One Hose with Curbside Nozzle)
  4. 10m spring retractable hose and reel.
  5.  Dispensing
  6.  Filtration: Donaldson
  7.  Metering: Flow Meter

2. Water: 9000L

  • Dispensing
  •  Transfer Type: High Pressure Washer – 250 Bar
  •  Transfer Type: High Volume transfer – 250 Lpm Hose
  • Storage: Electrically Retracting Hose Reel

 Product Tank

  • Sand blasted SA2.5
  •  Internal treatment – etch primed and  epoxy tank lining paint.
  •  External etch primed and OEM topcoat.
  • Rear Compartment Configuration
  •  

1. Power

  • +Diesel Auxiliary Power Unit Must be included
  •  Lube unit power source is completely
  •  independent from truck. Truck can be locked out whilst
  •  using lube functions.
  •  APU is matched with power requirements of lube unit for increased efficiency.
  •  Service Unit will be powered by a Diesel
  • Engine rated 38 kw@1800rpm.
  •  Power unit will be mounted within a sound insulated cabin on the rear of the

deck.

  •  The control panel including emergency stop functions for the power unit will be mounted in
  • the service hatch at ground level.

2. Compressor

  • Dynaset HK 1000 Piston Compressor (INCLUDED)
  • Hydraulically driven Piston type air compressor.
  • Up to 12 bar / 174 Psi air pressure.
  • 1000 Lpm (36 CFM) flow rate at 6 Bar (ISO 1217)
  • 270L/70 gal air receiver.
  • FRL for wet air consumers.
  • Automatic speed valve.
  • Pneumatic controlled unloader valve for continuous duty applications.

Rear Sump Compartment Configuration

1. Bund Tank

  • Collects any spillage on the deck or in the nozzle compartment.
  • Can be drained through a cam lock receiver.

2. Tool Compartment

  • Lockable tool compartment.
  • Large storage volume for equipment.

(iii) Lube Truck – 40t ADT based: Field Service

Truck Module

  • 3000L Water Tank
  • 1000L x 2 Gear Oil Tanks
  • 4000L Waste Oil Tank}
  •  Drop Down, bunded tool and waste filter compartment
  • 1000L Coolant Tank
  •  800kg of Grease Storage}
  •  5000L of Engine Oil Storage}
  •  5000L of Hydraulic Oil Storage:

Front Configuration}

  1. Coolant: 1000 L
  2. Dispensing,
  3.  Dispensing Nozzle: Piusi Pistol-ONE Dispensing Nozzle,
  4.  Nozzle Coupler: Dispensing valve stock included nozzle
  5.  Hose Storage: Spring Retracting Hose Reel
  6.  Transfer Type: Pneumatic 25 Lpm

Filtration

  • Donaldson 200-micron SS wire mesh filter
  •  Metering: Flow Meter

 Receiving

  • Receiver: Wiggins Dry Break Receiver
  • Product Tank
  • Parker pancake breather – 3 microns.
  • Sand blasted SA2.5
  • Internal treatment – Chemically stabilized.
  •  External etch primed and OEM topcoat.

2. Water: 3000L

Dispensing

  • Transfer Type: High Pressure Washer – 250 Bar
  • Hose Storage: Spring Retracting Hose Reel
  •  Product Tank
  •  Sand blasted SA2.5
  •  Internal treatment – etch primed and epoxy tank lining paint.
  •  External etch primed and OEM topcoat.

 Deck Configuration

1. Grease: 880 kg

 Dispensing

  • Bulk High Volume Dispensing Nozzle:
  •  1-1/4″ high pressure ball valve Grease
  •  High Pressure Dispensing Nozzle: 1/4 pro-shot with Z-swivel
  •  Hose Storage: Spring Retracting Hose Reel

 Receiving

  • Receiver: 2” SS Camlock coupling
  • Product Tank
  •  Parker pancake breather – 3 microns.
  •  Sand blasted SA2.5
  • lnternal treatment – Chemically stabilized.
  •  External etch primed and OEM topcoat.

2. Transmission Oil: 2000 L (1000 L x 2)

  • Dispensing
  • Dispensing Nozzle: Piusi Pistol-ONE standard anti-drip
  • Hose Storage: Spring Retracting Hose Reel
  • Transfer Type: Pneumatic 25 Lpm
  • Filtration: Donaldson 25micron
  • Metering: Flow meter

 Receiving

  • Receiver: Wiggins Dry Break Receiver
  • Product Tank
  • Parker pancake breather – 3 microns.
  • Sand blasted SA2.5
  • lnternal treatment – Chemically stabilized.
  •  External etch primed and OEM topcoat.

3. Gear Oil: 2000 L(1000 Lx 2)

  • Dispensing
  • Dispensing Nozzle: Piusi Pistol-ONE standard anti-drip
  • Hose Storage: Spring Retracting Hose Reel
  • Transfer Type: Pneumatic 25 Lpm
  • Filtration: Donaldson 25micron
  • Metering: Flow meter

Receiving

  • Receiver: Wiggins Dry Break Receiver
  • Product Tank
  • Parker pancake breather – 3 microns.
  • Sand blasted SA2.5
  • lnternal treatment – Chemically stabilized.
  • External etch primed and OEM topcoat.

Base Configuration

1. Engine Oil: 5000 L

  •  Dispensing
  • Dispensing Nozzle: Piusi Pistol-ONE standard anti-drip
  • Hose Storage: Spring Retracting Hose Reel
  • Transfer Type: Pneumatic 25 Lpm
  • Filtration: Donaldson 25micron
  • Metering: Flow meter
  • Receiving
  • Receiver: Wiggins Dry Break Receiver
  • Product Tank
  • Parker pancake breather – 3 microns.
  • Sand blasted SA2.5
  • Internal treatment – Chemically stabilized.
  • External etch primed and OEM topcoat.

2. Hydraulic Oil: 5000 L

 Dispensing

  • Dispensing Nozzle: Piusi Pistol-ONE standard anti-drip
  • Hose Storage: Spring Retracting Hose Reel
  • Transfer Type: Pneumatic 25 Lpm
  • Filtration: Donaldson 25micron
  • Metering: Flow meter
  • Receiving
  • Receiver: Wiggins Dry Break Receiver

 Product Tank

  • Parker pancake breather – 3 microns.
  • Sand blasted SA2.5
  • lnternal treatment – Chemically stabilized.
  • External etch primed and OEM topcoat.

3. Waste Oil: 4000L

  • Suction/Discharge
  • Transfer Type: Pneumatic 25 Lom
  • Discharge Hose Storage: Spring Retracting Hose Reel
  • Product Tank
  • Camlock Receiver
  • Parker pancake breather – 3 microns.
  • Sand blasted SA2.5
  • Internal treatment – Chemically stabilized.
  • External etch primed and OEM topcoat.

Rear Compartment Configuration

1. Power

2. Diesel Auxiliary Power Unit Must be Included

  • Lube unit power source is completely independent from truck.
  • Truck can be locked out whilst using lube functions.
  • APU is matched with power requirements of lube unit for increased efficiency.
  • Service Unit will be powered by a Diesel Engine rated 38 kw@1800rpm.
  • Power unit will be mounted within a sound insulated cabin on the rear of the deck.
  • The control panel including emergency stop functions for the power unit will be mounted in the service hatch at ground level.

3. Compressor

  • Dynaset HK 1000 Piston Compressor
  • Hydraulically driven Piston type air compressor.
  • Up to 12 bar / 174 Psi air pressure.
  • 1000 Lpm (36 CFM) flow rate at 6 Bar (ISO 1217)
  • 270L/70-gal air receiver.
  • FRL for wet air consumers.
  • Automatic speed valve.
  • Pneumatic controlled unloader valve for continuous duty applications.

4. Reverser Camera. Brigade camera, harness and 7” in cab display

Rear Sump Compartment Configuration

1. Bund Tank

  • Collects any spillage on the deck or in the nozzle compartment.
  • Can be drained through a cam lock receiver.

2. Tool Compartment

 Lockable tool compartment.

 Large storage volume for equipment.

3. Used Filter Compartment

  • Used filter compartment drains into bund tank.
  • Large storage volume.

NB: Make sure you include pictures of all Equipment

Submission of Quotes

Please submit your quotes via email to [email protected]. The reference Supply of Service Trucks Tender ref: NM39/2022” must be quoted in the subject line of the email.

NB: The Company reserves the right to invite any other supplier(s) who did not submit a quote through this advertisement.

Key Dates

  • Las date to submit your Quote 6 June, 2022

North Mara Gold Mine Limited s

WhatsApp
Twitter
Email
LinkedIn
Instagram

Related